CleanSpace CS302, User Instructions

Page: 10 / 90

10
CS3026 BIO Exhalation Valve Cover – HALO BIO; and with CS3025 Filter HE – HALO BIO which are
specifically designed to interface to the Head Cover. No other combination of mask and filter is approved
for use with the HALO BIO Head Cover.

The HALO Half Masks when configured with the CS3026 BIO Exhalation Valve Cover – HALO BIO are
approved and may be used without the Head Cover, with either the HE Filter HALO BIO (CS03025) or
the HALO Standard HE Filter (CS3022).

The optional Exhalation Filter (CS3027) may be used with or without the HALO BIO Head Cover.

The BIO Exhalation Valve Cover can be cleaned or disposed of depending on the user’s environment
and/or application. For instructions on removing it see Section 20.
11. Controls and Indicators
POWER BUTTON
This button is used to switch between the three (3) operating Modes: “On”, “Standby” and “Off”
Mode.
i) Standby Mode is when the green battery indicator lights are on, the motor is not running and
there is no airflow to the mask. The respirator will automatically switch to Standby Mode within ten
(10) seconds of the user taking it off. If the respirator is in Off Mode it will switch to Standby Mode when the Power
button is pressed.
ii)
On Mode is when the respirator is being worn, the motor is running and there is air flow to the mask. The motor
will start (called On Mode) when the respirator detects a change in pressure in the mask triggered by your breathing.
In On Mode you should hear the motor running and feel the airflow on your face. You can also switch to On Mode
(start the motor) from Standby Mode by pressing the Power button once.
iii)
Off Mode is when the green battery indicator lights are off and the motor is not running and there is no air flow to
the mask. The respirator automatically switches into Off Mode three (3) minutes after it has been removed from the
user’s face and the sensors detect that there is no breathing.