23
EN
Assembly
PLEASE NOTE!
■
Always switch off the device before replacing any accessories.
Removing / Inserting the Dust Container
•
Removing:
Press the release button (
2
) of the dust contain-
er (
8
) and remove the dust container from the motor unit (
3
)
by pulling it forwards.
•
Inserting:
Insert the locking lugs at the front below the motor
unit into the recesses which are provided for them on the dust
container. Then press the dust container onto the motor unit
until it is heard to click into place.
Removing / Inserting the Battery
To be able to remove the battery (
7
) from the motor unit (
3
) or insert it, the dust con-
tainer (
8
) must be removed
fi
rst (see “Removing / Inserting the Dust Container”).
•
Removing:
Press and hold the locking catch (
A
) on the
bottom of the handle in the direction of the arrow. Pull the
battery out of the motor unit at the same time.
•
Inserting:
Insert the battery into the guide with the con-
tacts at the top and slide it fully into the motor unit. You
must hear and feel the battery engage.
Attaching / Removing the Turbo Nozzle and Extension Tube
•
Attaching:
Plug the turbo nozzle (
17
) or the extension tube (
13
) directly onto the
suction opening (
10
). The catch must be heard to engage in place.
•
Removing:
Press the release button (
11
) on the suction opening or the extension
tube and pull off the turbo nozzle or the extension tube at the same time.
The turbo nozzle is attached to or removed from the extension tube in the same
way.
Attaching / Removing the Combi Nozzle
The nozzle adapter (
16
) is required to use the combi nozzle (
14
).
1. Plug the nozzle adapter into the suction opening (
10
) or the extension tube (
13
). The
catch must be heard to engage in place.
2. Plug the combi nozzle into the nozzle adapter.
3. To take it apart, pull the combi nozzle out of the nozzle adapter.
4. Press the release button (
11
) on the suction opening or the release button on the
extension tube and remove the nozzle adapter at the same time.
2.
1.
A
