www.cleanmate.eu
47
EN
NOTICE
Remove the battery if it will not be used for a longer time (14 days or longer). In case of battery
leakage, please remove the battery and wipe the battery slot clean while wearing protective
gloves. If the battery is fully discharged or not used for a longer time, its capacity may decrease
and need to be reactivated.
REINSTALL THE BATTERY
•
Before reinstall the battery and maintenance, power off the robot .
•
Open the battery cover.
NOTICE
- on the cover are battery contacts, don´t broke the
contacts from the battery cover to the robot.
•
Take out the battery from the battery compartment.
•
Disconnect the battery connector from the robot.
•
Place new battery into the compartment for the battery and connect the connector to the
robot.
•
Carefully close the battery cover, don´t press the cables with the battery cover.
•
Do not dispose the old battery as unsortet municipal waste.
LED control
Color of the LED control
Robot state
Purple brething
Charging
Blue glowing
Charging done
Blue blinking
Selecting mode
Red blinking
Malfunction
Red glowing
Low battery
Blue glowing
Clean mode
Sounds
No.
Beeps
Problem
Solution
1
o
Robot stucks
Move it to empty area, press start button
2
oo
Dust Bin Malfunction Remove the dust bin and re-install it properly.
Clean the dust bin and filter from the dust and
debris.
3
ooo
Driving wheels, side
brush malfunction
Clean the driving wheels, side brushes and
main brush from dirt and dust.
4
oooo
Anti-drop sensor
Check the Anti-drop sensor for dust and clean.
If the robot detects a problem and needs your assistance, it emits alarm beeps and the LED
control flashes RED. After solving the issue, push one time button Power Switch.
