12
DWP - 1106 A | Version 1.03
Disposal, recycling of used devices
Clean all plastic parts and painted surfaces with a soft,
damp cloth and a little neutral cleaner.
If necessary, clean the suction slots of the suction foot
with clear water.
The pump requires water for lubrication and must never
run dry.
Cleaning the filter
As soon as the pump water is no longer perfectly clean, it
may be necessary to clean the filter and suction area
(11, Fig.4). Use a steel brush to remove the accumulated
dirt.
It is also possible to clean the inner part. To do this, loo-
sen the screws (11, fig.4) that fix the filter to the pump
body and remove it. Use a steel brush to remove the dirt.
Finally, rinse the cleaned parts with clean water, put the
filter back in the pump body and tighten the screws.
Fig. 4: Cleaning the filter
Inspection of the rope
- Pull the pump out of the sump from time to time.
- Check rope. If the rope is damaged, replace it with
an original spare part.
- Check that the rope lugs on the pump are still able
to bear the load.
If the rope is damaged, you can try to pull the pump care-
fully out of the sump by the discharge line. Never pull on
the power cable.
11.2
Maintenance and repair
Maintenance and repair work may only be carried out by
qualified personnel.
Maintenance and repair work may only be carried out by
qualified personnel.
If the water pump does not work properly, contact a de-
aler or our customer service. The contact details can be
found in chapter 1.2 Customer Service.
All protection and safety equipment must be reinstalled
immediately after completion of repair and maintenance
work.
Make sure the pump is off before performing any main-
tenance or repair.
Regular maintenance and careful care reduce the risk of pos-
sible malfunctions and help extend the life of your device.
12 Disposal, recycling of used
devices
Please take care in your own interest and in the interest of
the environment that all component parts of the ma-chine
are only disposed of in the intended and permitted way.
12.1Decommission
Discarded devices must be taken out of operation imme-
diately in a professional manner in order to avoid later
misuse and danger to the environment or persons.
- Remove all environmentally hazardous operating mate-
rials from the old device.
- The disassembly of the water pump must be carried out
by a trained, professional specialist.
- Dispose of the machine components and operating
fluids in the appropriate disposal route.
12.2Disposal of electrical equipment
Please note that electrical equipment contains a large
number of recyclable materials and environmentally
harmful components.
Please help to ensure that these components are sepa-
rated and disposed of properly. In case of doubt, please
contact your local waste disposal service.
If necessary, use the services of a specialized waste dis-
posal company for processing.
12.3Disposal of lubricants
Please make sure that the coolants and lubricants used
are disposed of in an environmentally friendly manner.
Observe the disposal instructions of your municipal wa-
ste disposal company. The lubricant manufacturer provi-
des the disposal instructions for the lubricants used. If
necessary, ask for the product-specific data sheets.
DANGER!
Maintenance and repairs must always be carried out
by qualified personnel; any damaged parts must only
be replaced by original spare parts.
