background image

4

GP - Series | Version 1.03

Safety

Tips and recommendations

It is necessary to observe the safety notes written in 
these operating instructions in order to reduce the risk of 
personal injuries and damages to property. 

2.2 Obligations of the operating company

The operating company is the person who operates the 
water pump for business or commercial reasons by her

-

self, or leaves it to a third party for use or ap-plication, 
and who bears the legal product responsibility for the 
protection of the user, the staff or for third parties.

Obligations of the operating company

If the water pump is used for commercial pur-poses, the 
operating company of the house water system must 
comply with the legal working safety regulations. 

Therefore, the safety notes in this operating manual, as 
well as the safety, accident prevention and environment 
protection regulations applying for the area of applica-
tion of the water pump must be met. The follow-ing ap

-

plies in particular:

- The operating company must be informed about 

the applying industrial safety regulations and 
further analyse hazards resulting from the special 
working conditions at the place of use of the water 
pump. She must implement these in form of oper-
ating manuals for the operation of the water pump.

- During the entire lifetime the house water system, 

the operating company must verify whether the 
operating manuals prepared by her correspond to 
the current status of the regulations, and must ad

-

apt these if necessary.

- The operating company must unambiguously regu-

late and determine the responsibilities for installa-
tion, operation, troubleshooting, maintenance and 
cleaning.

- The operating company must ensure that all per-

sons who work with the water pump, have read 
and understood this manual. Furthermore she 
must instruct the staff in regular intervals and in-
form them about the hazards.

- The operator must provide the necessary protec-

tive equipment to the staff and order the use of the 
necessary protective equipment in a binding way.

Furthermore the operating company is responsible to 
keep the water pump always in a technically flawless 
state. Thus, the following applies:

- The operator must ensure that the maintenance in-

tervals described in this manual are kept.

- The operator must have all safety devices checked 

regularly for their good working order and their in

-

tegrity.

CAUTION!

This combination of symbol and signal words indica-
tes a potentially dangerous situation which may lead 
to slight or minor injury if not avoided. 

ATTENTION!

This combination of symbol and signal words indica-
tes a possibly dangerous situation which may lead to 
property and environmental damages if they are not 
avoided. 

NOTE!

This combination of symbol and signal words indi-
cates a potentially dangerous situation which may 
lead to material or environmental damage if not avoi

-

ded.

Tips and recommendations

This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation. 

Summary of Contents for 7521100

























Reviews: