16
GP - Series | Version 1.03
Disposal, recycling of used device
12 Disposal, recycling of used device
Please take care in your own interest and in the interest
of the environment that all component parts of the ma-
chine are only disposed of in the intended and permit-ted
way.
12.1 Decommissioning
Immediately decommission disused machines in order to
avoid later misuse and endangering of the environ-ment
or personal safety.
- Eliminate all environmentally hazardous operating ma
-
terials from the used device.
- If required, disassemble the machine into easy-to-
handle and usable components and parts.
- Dispose of machine components and operating materi
-
als by the disposal channels provided.
12.2 Waste disposal of electric equipment
Please note that electrical devices contain a variety of
recyclable materials as well as environmentally harmful
components.
You contributes to that these components are disposed
of separately and properly. In case of doubt, please con
-
tact your municipal waste disposal. As necessary, a spe
-
cialized waste disposal company can help be used for
the treatment.
12.3 Disposal of lubricants
Please pay attention to an environmentally friendly dis-
posal of the used coolants and lubricants.
Observe the disposal instructions of your municipal dis-
posal companies.Disposal notes for used lubricants are
available from the manufacturer of the lubricants. If
necessary, request the product-specific data sheets.
13 Disturbances, possible causes and
measures
ATTENTION!
If one of the following errors occurs, immediately stop
working with the water pump.
Before you begin troubleshooting, turn off the water
pump and unplug the power card. Otherwise it could
lead to serious injuries.
All repairs or replacement work may only be carried
out by qualified and trained specialist personnel.
NOTE!
If you can not solve the problems with the your house
water system yourself, then please contact your ne-
arest CLEANCRAFT dealer. Please write down follo-
wing information from the water pump or the opera-
ting instructions in advance to help you your problem
in the best possible way.
-Model name of the device
-Serial number of the device
-Constructions year
-Exact error description
Malfunction
Possible cause
Measurement
The motor can not be
started
1. No power available.
2. Capacitor is defective.
3. The rotating shaft and bearing.
are jammed.
4. The impeller is jammed.
1. Check with a GS-compliant device whether volt
-
age is present. Check mains plug.
2. Contact customer service.
3. Check the cause and remove the blockage from
the pump.
4. Turn the rotating shaft of the fan blade connector
with a screwdriver or disassemble the pump.
body to remove small parts.
The pump does not reach
the desired pressure.
1. Cut-out pressure set too high.
1. Contact customer service
Pump does not start.
1. Cut-out pressure set too low.
1. Contact customer service
Summary of Contents for 7521100
Page 24: ...www cleancraft de...
