CLEAN BURN CB 140, Operator'S Manual

Page: 11 / 142

Operator's Manual: Models CB-1750, CB-2500 & CB-3250
1-3
WARNING: Never alter or modify your furnace without prior written consent of
Clean Burn, LLC. Unauthorized modifications or alteration can adversely affect the proper,
safe operation of your furnace.
WARNING: The burner which is shipped with your Clean Burn furnace is to be used only
with your furnace according to the instructions provided in this manual. DO NOT use the
burner for any other purpose!
WARNING: The Best Operator is a Careful Operator!
By using common sense,
observing general safety rules, and adhering to the precautions specific to the equipment,
you, the operator, can promote safe equipment operation.
Failure to use common sense,
observe general safety rules, and adhere to the precautions specific to the equipment may
result in equipment damage, fire, explosion, personal injury and/or death.
WARNING: The installation, operation, and maintenance of this equipment in the U.S.
must be accomplished by qualified personnel and in compliance with the specifications in the
Clean Burn Operator's Manual and with all national, state, and local codes or authorities
having jurisdiction over environmental control, building inspection and fuel, fire and
electrical safety and the following standards:
NFPA 30 Flammable and Combustible Liquids Code
NFPA 30A Automotive and Marine Service Station Code
NFPA 31 Standard for the Installation of Oil Burning Equipment
NFPA 211 Chimneys, Fireplaces, Vents and Solid Fuel Burning Appliances
NFPA 88A Parking Structures
NFPA 88B Repair Garages
NFPA 70 National Electrical Code
The International Mechanical Code
The International Building Code
The International Fire Code
The International Fuel Gas Code
Likewise, the installation, operation, and maintenance of this equipment
in Canada
is to be
accomplished by qualified personnel and in compliance with the specifications in the
Clean Burn Operator's Manual and in accordance with the regulation of authorities having
jurisdiction and the following CSA Standards: B139 - Installation Code for Oil Burning
Equipment; B140.0 - General Requirements for Oil Burning Equipment; and C22.1 -
Canadian Electrical Code, Part 1.
Failure to comply with these standards and requirements may result in equipment
damage, fire, explosion, personal injury and/or death.
For Your Safety... (continued)