CLF
Laminar crossflow-cabinet
Clean Air Techniek B.V.
UM-CLF-XX-EN05.doc
16
Positions of the supply connection
•
The connection, that is located inside the installation, is standard assembled on the
worksurface inside the work space of the cabinet.
•
The connection, that is located outside the installation, is standard assembled in the bottom of
the installation.
Bunsen burner
Recommended to apply is the Fuego Bunsen burner, available at Clean Air Techniek B.V.
Positions of the supply connection
•
The connection is standard through the workopening.
Vacuum/ O
2
/ N
2
and compressed air connections
These connections are always assembled in combination with a tap.
Positions of the supply connection
•
The connection, that is located inside the installation, is standard assembled in combination
with a tap in the worksurface.
•
The connection, that is located outside the installation, is standard assembled in the bottom of
the installation.
UV-Radiator
The UV radiator is meant for disinfecting the working surface of the cabinet.
When the UV-radiator is on, the TL lighting will be switched off. The UV radiator may only be
switched on when the work space of the cabinet is entirely closed, this makes sure that the user
will not get in contact with UV-C radiation. Block the front aperture (a special night door can be
ordered for this purpose).
DANGER FOR BURNING
Avoid direct contact with UV-C radiation. This causes
burns to the skin and eyes.
The UV light can be switched on and off on the display
(see §5.7 on page 22). It is also
possible to adjust the UV disinfection, for each day a certain disinfection period can be defined
(see §5.10 on page 24).
