Claydon HYBRID M3F, Operator'S Manual

Page: 30 / 60

H
IN FIELD OPERATION
30 OPERATORS MANUAL - HYBRID - M3F & M4RF
The start stop finger switch should be set so that when the
drill is lifted out of work the switch is in the off position. To
achieve this the finger switch bracket should be adjusted so
that when out of work the seeding bar on the screen should
display the red crosses as shown below.
When in work the finger switch should be set 10 - 15mm
below the top link and should show the green seeds should be
shown in the seeding bar on the screen.
OUT OF WORK
(NOT SEEDING)
IN WORK
(SEEDING)
Field Use of the Drill
SETTING THE START STOP
In work the Top Link must always be higher at the drill than it is at the
tractor. See page 29 for an example.
! !
150mm