Claydon HYBRID M3F, Operator'S Manual

Page: 51 / 60

51
H
IN FIELD OPERATION
OPERATORS MANUAL - HYBRID - M3F & M4RF
When the transfer kit is in use the distribution head lid should be stored securely
in the machines toolbox.
! !
Fit the yellow bypass plate and tighten the wing
nuts so it is securely fastened (See image below).
Step 3
Re-fit the transfer pipe and jubilee clip so that it is
secure.
Step 4
HOPPER TO HOPPER TRANSFER KIT
Calibration
The seed metering unit should be calibrated using the process stated in the calibration section ( Page
46 - 49
). The fertiliser metering unit should also be calibrated in the same manner as the seed metering
unit; however, on the drills control box the fertiliser rate required (Kg/Ha), should be entered as half the
required seeding rate. Fir example, if the seeding rate was entered as 200 Kg/Ha on the control box, the
fertiliser rate should be entered as 100 Kg/Ha. This will ensure both hoppers empty at the same rate.