Selecting the operating mode
For playback of picture and sound, the corresponding
operating mode must be selected. The respective opera-
ting modes can be selected directly using the buttons
»DVD«, »TUNER«
or
»AUX/TV«
28. The individual ope-
rating modes are run through by pressing the
»SOURCE«
button 13.
DVD
Playing-back from the built-in DVD compact disc
Player
TUNER
Radio operation selecting the frequency band
AUX 1
Playback from a device connected to one of
AUX 2
the
»AUDIO IN AUX 1/2«
sockets 52.
Display 10 is used for control purposes..
Setting the volume
By pressing the
»ADJ/VOL. +/-«
buttons5/40, you can set
the volume as desired.
To switch off the sound, press the
»MUTE«
button 36 on
the remote control.
On re-pressing this button or one of the
»ADJ/VOL +/-«
5/40 the sound is switched back on.
Basic settings
The following settings only need to be carried out once
before putting the system into operation for the first time.
Before changing the basic settings (in the General Set-
up), check which corrections are required based on the
following table.
Menu display:
Factory setting:
Menu language
OSD LANG
ENGLISH
Video output
VIDEO OUT
SCART
Menu language (OSD LANG):
Select between GERMAN, ENGLISH, FRENCH,
ITALIAN, and SPANISH
Video output (VIDEO OUT):
Select...
SCART, when
»SCART OUT«
46 is connected to the te-
levision.
S-VIDEO, when
»S-VIDEO OUT«
47 is connected to the
television.
Setting the menu language (OSD LANG):
Switch on the device using the STANDBY switch
»POWER«
6. If necessary, select the video input at the
television. Switch to DVD operation by pressing the
»DVD«
button 28.
Press
»SETUP«
20. The SETUP MENU-MAIN PAGE ap-
pears on the screen. The
GENERAL SETUP
line is high-
lighted.
By pressing the
»ENTER«
button 21,
GENERAL SETUP
will appear.
Using button
»
«
select OSD-LANG to change the menu
language.
Press
»
«
21and highlight the desired language with
»
/
«
21.Confirm the setting with
»ENTER«
button 21.
Press »SETUP« 20 to leave the menu.
Setting the video output (VIDEO OUT)
(Proceed the same as when setting the menu language;
the device must be switched on and in DVD operating
mode).
-
Press the »SETUP«20 button until SETUP MENU-
MAIN PAGE appears. The
GENERAL SETUP
line is
highlighted.
-
Press
»ENTER«
21; the
GENERAL SETUP
appears.
-
Use
»
«
button 21 to select
VIDEO OUT
.
-
Press
»
«
.
-
Use the
»
/
«
to select the video output.
-
Press
»ENTER«
button 21 to confirm your selection.
-
Use
»SETUP«
button 20 to leave the menu.
Setting and storing the radio stations
Switch on the device using the STANDBY switch
»POWER«
6. Use
»TUNER«
28 or
»SOURCE«
button 13
to switch to tuner mode and select the desired frequency
band (FM or AM).
FM
87,5 MHz – 108,0 MHz
AM
522 kHz – 1620 kHz
33
SETUP MENU – MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
GENERAL PAGE
TV DISPLAY
NORMAL/ PS
VIDEO OUT
NORMAL/ LB
OSD LANG
16:9
MAIN PAGE
GENERAL PAGE
TV DISPLAY
VIDEO OUT
OSD LANG
GERMAN
ENGLISH
MAIN PAGE
FRENCH
ITALIAN
SPANISH
GENERAL PAGE
TV DISPLAY
VIDEO OUT
S-VIDEO
OSD LANG
SCART
MAIN PAGE
DVD 552 HC - GB 21.03.2003 8:58 Uhr Seite 33
