13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE DIRECTION AND SPEED
1. To adjust the speed, turn the switch
slowly forward until the desired
output is achieved.
• The three dots (small, medium
and large) do not denote a
specific power output but are
only for reference.
• Setting 1 (small dot) is the least
amount of power while setting 3
(large dot) is the most powerful.
• The wrench operates at maximum power in reverse. This setting is for
releasing threaded fasteners which may be tight.
NOTE:
Where the torque setting is critical, the final tightening of nuts or
bolts, must be by hand using a correctly calibrated torque
wrench.
USING THE IMPACT WRENCH
LOOSENING A WHEEL NUT/BOLT
1. Remove any wheel trim, before selecting the appropriate socket and
placing firmly on the square drive of the wrench.
2. With the FORWARD/NEUTRAL/REVERSE switch in the REVERSE running
position, and holding the wrench firmly in BOTH HANDS, pull the trigger. The
nut/bolt will be impacted repeatedly until it is loosened.
IMPORTANT: Release the trigger as soon as the nut begins to loosen.
3. Jack up the vehicle according to the vehicles handbook so that the wheel
is clear of the ground, then proceed to fully undo the wheel nuts/bolts.
WARNING: WAIT UNTIL THE WRENCH HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE SWITCH.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
Summary of Contents for X-Pro CAT202
Page 32: ......
