7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. ALWAYS wear eye protectors when using the tool - Eye protection must
provide protection from flying particles/objects from the front and the side.
Ear protectors should also be worn.
3. DO NOT overreach - Keep proper footing and balance at all times.
4. DO NOT use any type of bottled gas as a source of power for this tool.
5. DO NOT connect the air supply hose with your finger on the trigger.
6. DO NOT exceed the maximum pressure for the air tools 90 psi / 6.2 bar.
7. ALWAYS check hoses for leaks and ensure that all connections are secure.
8. ALWAYS keep the air supply hose away from heat, oil and sharp edges.
9. DO NOT use the tools for any purpose than that described in this manual.
10. DO NOT fit the tools to any stand or clamping device that may damage it.
11. ALWAYS disconnect from the air supply when:
• Performing maintenance
• The tools are not in use.
• The tools will be left unattended.
• Moving to another work area.
12. DO NOT use any tool if it is defective or operating abnormally.
13. ALWAYS avoid damaging the tools by applying excessive force.
14. ALWAYS maintain the tools. Keep them clean for the safest performance.
15. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
16. DO NOT force or misuse the tools which will do a better and safer job at the
rate for which they are designed.
17. These tools vibrates with use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs.
Seek medical advice before resuming use.
IMPACT WRENCH SPECIFIC HAZARDS
1. ALWAYS
use the impact wrench as described in these instructions.
2. ALWAYS
ensure the wrench is not moving and disconnected from the air
supply when changing sockets etc. Use only impact wrench sockets....DO
NOT use standard sockets.
3. ALWAYS
finish tightening nuts with a torque wrench or suitable spanner to
the correct torque as recommended by the vehicle manufacturer.
4. ALWAYS
avoid excessive use of the impact wrench. When tightening a nut
or bolt, only allow the wrench to impact briefly to avoid overtightening.
Summary of Contents for X-Pro CAT202
Page 32: ......
