Page -4-
Clarke
®
Operator's Manual IMAGE 26E
WARNING:
This machine is not equipped with a parking brake. Never leave the machine unattended.
For added safety, always place a chock in front of and behind the drive wheel.
WARNING:
Maintenance and repairs performed by unauthorized personnel could result in damage or
injury. Maintenance and repairs must be performed by authorized Clarke personnel only.
WARNING:
Electrical components of this machine can "short-out" if exposed to water or moisture.
Keep the electrical components of the machine dry. Wipe the machine down after each
use. For storage, keep the machine in a dry building.
WARNING:
Operating a machine without observing all labels and instructional information could result
in injury or damage. Read all machine labels before attempting to operate. Make sure all
of the labels and instructional information are attached or fastened to the machine. Get
replacement labels and decals from your Clarke distributor.
WARNING:
Wet floor surfaces can be slippery. Water solutions or cleaning materials used with this
type of machine can leave wet areas on the floor surface. These areas can cause a
dangerous condition for the operator or other persons. Always put "Caution" signs
around/near the area you are cleaning.
WARNING:
Using water that is above 140°F can damage the machine. Do not use water where the
temperature is above 140°F.
CAUTION:
Use of this machine to move other objects or to climb on could result in injury or damage.
Do not use this machine as a step or furniture. Do not ride on this machine.
CAUTION
:
Your machine warranty will be voided if anything other than genuine Clarke parts are used
on your machine. Always use Clarke parts for replacement.
CAUTION:
Using a extension cord with your machine will result in a voltage drop and loss of power.
Do not use an extension cord.
CAUTION:
Carpet damage can occur if carpet has not adequately dried before traffic resumes. Stay
off the carpet until it is dry.
https://harrissupplyind.com - To Order Parts Call 608-268-8080