Clarke
®
Operator's Manual IMAGE 26E
Page -17-
Nozzles
To remove the
nozzles
to clean or change nozzles,
follow this procedure:
Recovery Tool
1. Grasp the nozzle cap assembly and twist
counterclockwise to remove assembly from the
spray bar.
2. Pull the nozzle out of the cap.
3. Clean or replace the nozzle.
4. Replace nozzle back into cap.
5. Twist nozzle cap assembly back onto the
spray bar.
Brush Housing
1. Pull nozzle assembly out to the right hand
side of machine.
2. Firmly push nozzle in and turn 1/4 turn.
3. Pull nozzle out.
4. Clean and replace into nozzle assembly.
5. Replace nozzle assembly in brush housing.
MAINTENANCE
https://harrissupplyind.com - To Order Parts Call 608-268-8080