Page -20-
Clarke
®
Operator's Manual IMAGE 26E
The machine does not move.
The Power switch is off.
Turn on the "Power" switch.
The traverse switch is defective.
Contact an authorized service person
There is no solution flow.
Solution control dial in wrong position.
Turn dial to position for more flow.
Accessory Switch in wrong position.
Change to desired position.
The solution tank is empty.
Fill the solution tank.
There is an obstruction in the
Remove the obstruction from the hose
solution hose or filter.
or filter.
Solenoid is defective.
Contact an authorized service person
Pump is defective
Contact an authorized service person
The machine doesn't extract
The recovery tank is full.
Drain the recovery tank.
solution from the floor.
The recovery tool is not
Lower and/or adjust the tool.
resting on the floor.
Filter screen plugged
Clean screen and replace.
Opening in recovery tool is plugged.
Clean and retry.
The cleaning is not even.
The brush is worn.
Replace / reverse the brush.
The brush in not level.
Level brush on floor using leveling srews on
brush door.
There is damage to the brush
module or spray assembly.
Contact an authorized service person.
The solution level is low.
Fill the solution tank.
Too little solution.
Increase solution flow.
Uneven or no spray from nozzles
.
Dirty or plugged spray nozzles.
Clean the spray assembly or nozzles.
Worn spray nozzles.
Replace spray assembly or nozzles.
Water leaks from the spray
Debris in the check valve.
Contact an authorized service person.
nozzles with the pump "OFF".
Defective check valve.
Contact an authorized service person.
There is no suction.
The vac motor is not running.
Turn vac motor switch on.
Vacuum hose obstruction.
Remove the obstruction.
Vacuum intake screen covered.
Clean and retry.
Vac hose damaged.
Replace the hose.
The dome gasket worn or damaged.
Replace the gasket.
Motor brushes are worn.
Replace motor brushes.
Loose motor connection.
Contact an authorized service person.
How to Correct Problems in the Machine
Action
Problem
Cause
https://harrissupplyind.com - To Order Parts Call 608-268-8080