9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATING THE WELDER
THERMAL CUTOUT
If the machine stops at any time and
the amber light on the front panel
illuminates, the thermal cutout has
activated.
Wait until the transformer has cooled
sufficiently (the amber light goes out)
before restarting work.
ATTACHING THE EARTH CLAMP
Attach the earth clamp firmly to the workpiece as close as possible to the
point of weld.
IMPORTANT: Ensure that the earth clamp is attached to clean, solid metal. If
necessary, thoroughly clean with a wire brush or similar to guarantee a
good connection.
SETTING THE WELDING CURRENT
1. Select the welding current by
turning the adjustment dial and
observing the setting on the scale
on top of the machine.
• The scale also recommends the
size of welding rod to be used.
• With practice you will get a feel
for the best current settings for
different welding rod
thicknesses.
Summary of Contents for EASIARC 165
Page 16: ......
