background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Welder. 

Before attempting to operate the machine, it is essential that you read this 
manual thoroughly and carefully follow all instructions given. In doing so you 
will ensure the safety of yourself and that of others around you, and you can 
also look forward to the welder giving you long and satisfactory service. 

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights. 

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste. All 
tools, accessories and packaging should be sorted, taken to a re-
cycling centre and disposed of according to the laws governing 
Waste Electrical and Electronic Equipment.

Summary of Contents for EASIARC 165

















Reviews: