10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6. Install the water tank beneath the
grinding stone. Fill the water tank
with clean water up to the fill line
indicated on the tank as in Fig 3.
During operation,the grinding stone
will become saturated with water.
Ensure the water tank is re-filled when
necessary and discard any excess
particles of stone which have
accumulated in the water tank.
7. To start/stop the grinder press the
ON/OFF buttons.
8. Run the grinder and apply a light
coating of machine oil to the
leather honing wheel. Next,
distribute the abrasive paste,
evenly onto the honing wheel
with a stick or suitable tool as in Fig
5. This should be sufficient for five
to ten tool honing operations. This
process should be repeated as
required to ensure the long life of
the honing wheel and achieve a
good finish.
