16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
THE THICKNESSER
BEFORE USE
TABLE HEIGHT ADJUSTMENT
1. Rotate the table elevating handle
to raise/lower the table.
• 1 complete turn = 3 mm.
2. The scale shows the estimated
height.
NOTE:
Use calibrated tools to get
exact measurements from the
workpiece.
DUST COLLECTION
Before operation, connect a suitable
dust collector to the dust chute
shown.
NOTE:
If a dust collection system is
not used the quality of your
cut will suffer.
WARNING: DISCONNECT MACHINE FROM POWER SOURCE BEFORE
MAKING ANY ADJUSTMENTS. FAILURE TO COMPLY MAY CAUSE SERIOUS
INJURY.
Summary of Contents for CPT1000
Page 24: ......
