13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FENCE BEVEL ADJUSTMENT
The fence can be tilted backwards up to a maximum of 45
o
.
1. Loosen the bevel lock handle.
2. Set the fence at the required
angle.
• Use the scale (0 - 45
o
) and
pointer shown.
3. Retighten the bevel lock handle.
DUST COLLECTION
Before operation, connect a suitable
dust collector to the dust chute
shown.
NOTE:
If a dust collection system is
not used the quality of your
cut will suffer.
USING THE PLANER
DIRECTION OF GRAIN
If the wood chips and tears as you
cut it, you are probably cutting
against the grain. Turn the wood
around and feed it in the opposite
direction to cut with the grain.
CORRECT OPERATING POSITION
The operator should stand to one
side of the cutterhead.
WARNING: MAKE SURE THAT THE TIMBER IS COMPLETELY FREE OF NAILS,
SCREWS AND STAPLES ETC.
Summary of Contents for CPT1000
Page 24: ......
