10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
DUST EXTRACTION
We STRONGLY recommend that a dust extraction device is used with this
machine.
1. Attach a suitable hose from the
dust extractor to the outlet,
beneath the table.
• Dust extractors are available
from your Clarke dealer).
MAINTENANCE AND SERVICING
The machine is completely maintenance free, with the exception of ensuring it
is kept clean and free from build up of sawdust at all times. This should be
carried out with an old paintbrush or similar, and a vacuum cleaner.
The panel beneath the table is secured by two screws. Remove these to gain
access to the lower half of the disc.
REPLACING SANDING DISCS
Replacement sanding discs (packets of 5) in three different grit sizes are
available from your Clarke dealer.
1. Peel off the worn disc from the machine.
2. Remove the protective cover from the back of the new sanding disc.
3. Gently slide it between the work table and disc so that it is concentric
about the disc.
4. Press firmly so that it adheres to the disc, turning the disc as you do so.
WARNING: REMOVE THE PLUG FROM THE POWER SUPPLY BEFORE
CARRYING OUT ANY ADJUSTMENT, SERVICING OR MAINTENANCE.
1
60 grit - self adhesive (Packets of 5)
Part No. 6502305
2
80 grit - self adhesive (Packets of 5)
Part No. 6502310
3
120 grit - self adhesive (Packets of 5)
Part No. 6502315
