Hitachi 4966376333011 Service Manual Download Page 1 | Manualshive

Page: 1 / 9

Hitachi 4966376333011 Service Manual Download Page 1

PRODUCT NAME

36 V Cordless Concrete Vibrator

Model

UV 3628DA

TROUBLESHOOTING GUIDE --------------------------------------------------------------------------------------------- 1

REPAIR GUIDE ---------------------------------------------------------------------------------------------------------------- 2

1. Precautions on disassembly and reassembly ----------------------------------------------------------- 2

• Disassembly   ------------------------------------------------------------------------------------------------- 2
• Reassembly   -------------------------------------------------------------------------------------------------- 4
• Tightening torque   ------------------------------------------------------------------------------------------- 6
• Checking after reassembly   ------------------------------------------------------------------------------- 6
• No-load current   ---------------------------------------------------------------------------------------------- 6

CONTENTS

Page

CONFIDENTIAL

Jun. 2020

Overseas Sales Management Dept.

U

1
2
3
...
»

Summary of Contents for 4966376333011










Reviews:

No comments