11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATING INSTRUCTIONS
OPERATING THE ROTARY TOOL
1. To switch the rotary tool on, rotate the
speed control away from 0.
2. Select a suitable speed using the
speed controller.
• The low speed settings should be
used for removing rust, and
polishing.
• The medium speed settings should
be used for drilling, engraving,
sharpening and removing paint.
• The high speed settings should be used for cutting metal and sanding wood.
3. To switch the rotary tool off, set the speed control to 0.
WARNING: BEFORE OPERATING THE ON/OFF SWITCH, MAKE SURE THAT
THE COLLET AND ACCESSORIES HAVE BEEN CORRECTLY AND SECURELY
FITTED.
WARNING: ALWAYS WAIT FOR COMPLETE RUN DOWN, AND THE
ACCESSORY TO STOP ROTATING, BEFORE PUTTING THE ROTARY TOOL
ASIDE.
Summary of Contents for CCRT266
Page 16: ......
