Clarke CCRT266 Operation & Maintenance Instructions Manual Download

Page: 12 / 16

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CLEANING AND MAINTENANCE

• After use, thoroughly clean all excess chippings and dust from the rotary tool,

taking special care to clean the cooling vents.

• Clean the spindle lock, the chuck and the spindle collar.

• Keep all accessories sharp and clean.

• There are no user serviceable parts inside this rotary tool.

• Worn, or damaged parts should be replaced by qualified personnel.

• Refer to qualified service personnel if internal maintenance is required.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All
tools, accessories and packaging should be sorted, taken to a recycling
centre and disposed of in a manner which is compatible with the
environment.

WARNING: MAKE SURE THAT THE BATTERY HAS BEEN REMOVED FROM THE
ROTARY TOOL BEFORE STARTING ANY CLEANING, OR MAINTENANCE
PROCEDURES.

Summary of Contents for CCRT266

















Search results

Summary of Contents for CCRT266

Reviews:

Related manuals for CCRT266

Brands by name

Popular brands

Clarke CCRT266, Operation & Maintenance Instructions Manual

Search results

Summary of Contents for CCRT266

Reviews:

Related manuals for CCRT266

Brands by name

Popular brands