21
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Drill bit burns or
smokes.
a. Incorrect speed.
b. Swarf is not discharging
c. Dull drill or not proper
clearance for material.
d. Needs coolant.
e. Excessive feed pressure
a. Refer to Cutting Speed chart
& adjust drill speed
accordingly.
b. Clean drill.
c. Check sharpness & taper.
d. Use coolant whilst drilling.
e. Apply less pressure.
Table difficult to
raise.
a. Needs lubrication.
b. Table lock tightened.
a. Lubricate with light oil.
b. Loosen clamp.
Summary of Contents for 6505532
Page 28: ......
