9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
13. With the drive assembly in
position, re-fit the cover and
secure with the 6 self-tapping
screws.
14. Using the X-head screws, rubber
washers, flat washers and M8 nuts,
loosely fit the blades to the upper
drum, noting that the tapered
end will be at the bottom of the
drum.
(Fixings pack E
)
15. Rest the upper drum, (with
blades) on the lower drum. Rotate
the upper drum gently so that all 6
holes in the upper drum line up
with those in the lower drum.
• The lower tips of the blades line
up with their fixing holes in the
bottom of the lower drum.
16. When all fixing holes line up,
secure the upper drum to the
lower drum using the 6 cross-head
screws and washers. (
Fixing pack
F)
.
17. Secure the mixing blades to the
bottom of the mixing drum using
the M8 x 20 bolts and nuts.
18. Tighten all fixings and check that
all components are secure.
Summary of Contents for 3400841
Page 16: ......
