Clarity XLC2, User Manual, Page: 25 / 128

22
The XLC2 has one direct (one-
touch) memory location and 10
indirect (two-touch) memory
locations on the telephone (0-9)
that can be programmed to dial
frequently called numbers of up
to 24 digits.
M
E
M
TALK
A
B
2
D
E
3
To program a memory location:
1. Press the MEM button.
2. Dial the number you wish to store.
3. Press the
MEM button again.
4. Press either the emergency button (A) or the number
on the dial pad to which you wish to store the number.
5. A long beep will indicate the programming process is
complete.
NOTE : The TALK button blinks (green) during the
programming process; it will stop blinking when the
programming process is complete (at step 5, above).
To replace a stored number, simply reprogram a new
number in its place - follow steps 1-5 above.
To dial a stored number :
1. A - press A when the handset is not in use. The phone
dials the stored number. (Or you can press TALK , then
press
A
for the same result).
2. 1-0 - press TALK , press MEM , press 1 (or any other
numeric button). The phone dials the stored number.
Programming / Dialing
Memory Keys
XLC2