Clarity XLC2, User Manual, Page: 19 / 128

16
10. TALK: Press TALK to start an outgoing phone call
or to answer an incoming call. Also, press TALK when the
handset is found (if the FIND function is activated from the
base).The TALK button lights up as per the settings below:
• green when the phone is in use, non-Boost mode;
• red when the BOOST function is engaged;
• orange when the OSA function is active;
• blinks green during incoming ring or when the base is
paging the handset (FIND function is engaged) - along with
the visual ringer;
• blinks green (slower) during the memory programming
process.
11. Dial Pad: Used to dial the phone numbers. The keys also
serve as the location for 10 two-touch memory locations (see
details under PROGRAMMING / DIALING MEMORY KEYS
section - page 22). The dial pad is backlit for ease of use.
12. RD / P (Redial / Pause):
When you hear the dial
tone, press this button to redial the last number dialed (up to
32 digits). Press this button while programming the memory
keys to insert a two second pause.
13. TONE Switch: Use this switch to pick one of the three
tone settings available (see page 23).
14. NECKLOOP Port: Use a standard 3.5mm neckloop
with your XLC2 handset. We recommend the Clarity CE30
Neckloop.
15. Headset Port: Use a standard 2.5mm plug headset
with your XLC2 handset. We recommend the Plantronics
M175C.
16. RINGER ON / OFF: Set this switch to OFF position
if you want to turn off the handset ringer.
Feature List & Overview -
Handset
XLC2