Clarion VXZ646, Owner'S Manual

Page: 37 / 46

VXZ646
39
English
Operations Common to Each Mode
Setting the method for title
scroll
Set how to scroll in CD-TEXT, MP3 Title while in
the CD changer mode.
∗
The factory default setting is “ ON ”.
1. Press the [ A ] button to the adjustment
selection display.
2. Press the [
a
] or [
d
] button to select
“ AUTO SCRL ”.
3. Turn the [ ROTARY ] knob clockwise or
counterclockwise and select “ ON ” or “ OFF ”.
ON :
To scroll automatically.
OFF :
To scroll just 1 time when the title was
changed or the [
A ] button was pressed and
hold for 1 second or longer.
4. Press the [ A ] button to return to the previous
mode.
Dimmer control
You can set the dimmer control “ ON ” or “ OFF ”.
∗
The factory default setting is “ ON ”.
1. Press the [ A ] button to switch to the
adjustment selection display.
2. Press the [
a
] or [
d
] button to select
“ DIMMER ”.
3. Turn the [ ROTARY ] knob clockwise to “ ON ”
or counterclockwise to “ OFF ”.
4. Press the [ A ] button to return to the previous
mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “ 8 ”. (Adjustment
level: 1 to 16)
1. Press the [ A ] button to switch to the
adjustment selection display.
2. Press the[
a
] or [
d
] button to select
“ CONTRAST ”.
3. Turn the [ ROTARY ] knob clockwise or
counterclockwise to adjust the contrast.
4. Press the [ A ] button to return to the previous
mode.
Setting the Subwoofer
∗
The factory default setting is “ SUB-W ON ”.
1. Press the [ A ] button to switch to the
adjustment selection display.
2. Press the [
a
] or [
d
] button and select
“ SUB-WOOFER ”.
3. Turning the [ ROTARY ] knob clockwise or
counterclockwise and select “ ON ” or “ OFF ”.
4. Press the [ A ] button to return to the previous
mode.
Setting LOW PASS FILTER
∗
This function can be adjusted only when the
subwoofer output is set to “
ON ”. For details on
“ Setting the Subwoofer ”, refer to the section
“ Operations Common to Each Mode ” of each
owner’s manual.
∗
The factory default setting is “ LPF THRGH ”.
1. Press the [ A ] button to switch to the
adjustment selection display.
2. Press the [
a
] or [
d
] button to select “ SUB-
W LPF ”.
3. Turn the [ ROTARY ] knob clockwise or
counterclockwise to select the setting. Each
time you turn the [
ROTARY ] knob, the setting
changes in the following order:
LPF THRGH
➜
LPF 50Hz
➜
LPF 80Hz
➜
LPF 120Hz
4. Press the [ A ] button to return to the previous
mode.
Selecting the external
amplifier
Set AMP CANCEL to “ ON ” (internal amplifier use
OFF) when an external amplifier is connected
and the internal amplifier is not used.
∗
The factory default setting is “ OFF ”.
1. Press the [ A ] button to switch to the
adjustment selection display.
2. Press the [
a
] or [
d
] button and select
“ AMP CANCEL ”.
3. Turning the [ ROTARY ] knob clockwise or
counterclockwise and select “ ON ” or “ OFF ”.
ON :
Use with connecter AMP.
OFF :
Use with inside AMP.
4. Press the [ A ] button to return to the previous
mode.