Clarion VXZ646, Owner'S Manual

Page: 12 / 46

14
VXZ646
English
Adjusting the Z-Enhancer Plus
1. Press the [ Z+ ] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [ A-M ] button and turning the
[ ROTARY ] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the - direction.
●
When “ B-BOOST 0 ” selected, you can
adjust the bass in the range of -3 to 3.
●
When “ IMPACT 0 ” selected, you can adjust
the bass and treble in the range of -3 to 3.
●
When “ EXCITE 0 ” selected, you can adjust
the bass and treble in the range of -3 to 3.
∗
When Z-Enhancer Plus is selected, press
and hold the [
Z+ ] button for 1 second or
longer to change to the “ CUSTOM ” mode.
Bass/treble characteristics become flat and
the indication “
Z+ FLAT ” is shown in the
display.
Adjusting the tone
Press the [ A-M ] button and select the item to
adjust. Each time you press the [ A-M ] button, the
item changes as following order:
●
When “BASS BOOST” is set
“SW-VOL 0”
➜
“B-BOOST 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “IMPACT” is set
“SW-VOL 0”
➜
“IMPACT 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “EXCITE” is set
“SW-VOL 0”
➜
“EXCITE 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “CUSTOM” is set
“SW-VOL 0”
➜
“BASS”
➜
“TREBLE”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function
mode.
●
When “Z+ OFF” is set
“SW-VOL 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
* If subwoofer is effective, “ SW-VOL 0 ” can be
selected.
Adjusting the subwoofer
∗
The factory default setting is “ SW-VOL 0 ”
∗
This function can be adjusted only when the
subwoofer output is set to “
ON ”. For details on
“ Setting the Subwoofer ”, refer to the section
“ Operation Common to Each Mode ” of each
owner’s manual.
1. Press the [ A-M ] button and select “ SW-VOL 0 ”.
2. Turning the [ ROTARY ] knob clockwise or
counterclockwise to adjust the subwoofer
volume.
Basic Operations
∗
The factory default setting is “ SW-VOL
0 ”.(Adjustment range: -6 to +6)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the bass
(Gain, Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “
CUSTOM ”.
1. Press the [ A-M ] button and select “ BASS ”.
2. Turning the [ ROTARY ] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
∗
The factory default setting is “ B
Å Å Å Å Å
GAIN
0
Î
“. (Adjustment range: -6 to +8)
3. Press the [
a
] or [
d
] button to select
“ B
Å Å Å Å Å
FREQ 50
Î
“.
Turning the [ ROTARY ] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “ B
Å Å Å Å Å
FREQ
50
Î
“. (Adjustment 50/80/120 Hz)
4. Press the [
a
] or [
d
] button to select “ B
Å Å
Å Å
Å
Q
1
Î
“.
Turning the [ ROTARY ] knob clockwise or
counterclockwise to select the Q-curve.
∗
The factory default setting is “ B
Å Å
Å Å
Å
Q 1
Î
“.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the treble
(Gain, Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “
CUSTOM ”.
1. Press the [ A-M ] button and select “ TREBLE ”.
2. Turning the [ ROTARY ] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
∗
The factory default setting is “ T
Å Å
Å Å Å
GAIN
0
Î
“. (Adjustment range: -6 to +6)
3. Press the [
a
] or [
d
] button to select
“ T
Å Å
Å Å
Å
FREQ 12k
Î
“.
Turning the [ ROTARY ] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “ T
Å Å Å Å Å
FREQ
12k
Î
“. (Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.