English
Owner
’s manual
56
VRX848RVD/VRX743R
PTY seek
1. Touch the [
SUB
] key in the MAIN screen.
Touch the [
PTY SELECT
] key, and then
touch the [
PRESET
] key or [
ITEM
] key.
The PTY select mode is turned on.
2. Select a desired PTY.
3. Press the [
d
] or [
a
] of button. If you press
the [
d
] button, the unit seeks a PTY
broadcast moving up the frequencies; if you
press the [
a
] button, it seeks moving down
the frequencies.
∗
If no station with the selected PTY broadcast
can be received, the unit returns to PTY select
mode.
PTY preset memory
1. Touch the [
SUB
] key in the MAIN screen.
Touch the [
PTY SELECT
] key, and the
[
ITEM
] key appears in the display.
PTY select mode is turned on.
2. Select a desired PTY.
3. If you press and hold any one of the
[
DIRECT
] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
∗
The PTY items are same as in RDS operation.
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“
ALARM
” appears in the display and the
emergency broadcast can be heard.
∗
RDS interrupt does not function during AM radio
reception.
●
Cancelling an emergency broadcast
Touch the [
SUB
] key in the MAIN screen and
the [
AF
] key appears in the display.
If you touch the [
AF
] key, emergency broadcast
reception is cancelled.
Volume setting of TA, emergency
broadcast (ALARM), information
and PTY
The volume for TA, ALARM, information and
PTY interrupts can be set during TA, ALARM or
PTY interrupts.
∗
The factory default setting is “
15
”.
During a TA, ALARM or PTY interrupt, operate
the [
VOL
] button upward or downward to set the
volume to the desired level (00 to 33).
∗
When the TA, ALARM, information or PTY
interrupt ends, the volume returns to the level it
had before the interrupt.
Dynamic Label Function
A dynamic label (hereinafter referred to as
“
DLS
”) is a text data associated with each DAB
service. This set can display DLS up to 128
characters in a display.
∗
This function is enabled only when the panel is
open.
DLS display mode
Normally, 16 letters x 4 lines are displayed in the
MAIN screen. Touch the [
DLS
] key on the MAIN
screen to display all DLS text. To cancel the
DLS mode and return to the previous display,
touch the [
RTN
] key. If there is a DLS data in the
reception service, DLS text is displayed in the
text displaying area.
DLS memory
Up to six DLSs, currently being received, can be
stored. Touch the [
DLS
] key in the MAIN screen.
Touch the [
P.SET
] key and touch and hold the
[
DLS MEMO1
] to [
DLS MEMO6
] key for 2
seconds or longer, and the DLS page currently
being displayed is stored.
DLS Calling
To call the DLS stored in the DLS memory,
press the [
DIRECT
] button. The DLS in the DLS
memory is displayed by 16 characters (2 lines)
at the intervals of 5 seconds (automatic calling).
To display at shorter intervals, press the
[
DIRECT
] button while waiting for successive
DLS character string to be displayed, the
following DLS character string is displayed
(manual calling).
Digital Radio/DAB Operations
