Clarion VRX743R, Owner'S Manual

Page: 26 / 72

30
VRX848RVD/VRX743R
English
Owner
’s manual
Basic Operations
●
Setting the car speaker output for the
cellular phone
∗
The factory default setting is “ RIGHT ”.
∗
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Touch the [
z
] key.
2-2. Touch the [ TEL SP ] key to select “ LEFT ”
and “ RIGHT ”.
• LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
• RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
Note:
• During cellular phone interrupt, speakers setting
is impossible.
●
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗
The factory default setting is “ OFF ”.
2-1. Touch the [
z
] key.
2-2. Touch the [ TEL SWITCH ] key to select
“ ON ”, “ OFF ” and “ MUTE ”.
• OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the
cellular phone from the cable or turn off the
power of the cellular phone.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗
When listening to your calls on your car
speakers, you can adjust the volume by
operating the [
VOL ] button.
• MUTE:
The sound from this unit is muted during
telephone calls.
∗
This function is not compatible with all cellular
telepones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Listening to the radio
1. Press the [ FUNC ] button and select the
Radio mode. The frequency is displayed.
2. Press the [ BAND ] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1
➜
FM2
➜
FM3
➜
AM (MW/LW)
➜
FM1...
3. Press the [
a
] or [
d
] button to tune in the
desired station.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can tune in to receivable broadcast
stations; LOCAL SEEK can tune in to only
broadcast stations with a good reception
condition.
1. Press the [ BAND ] button and select the
desired band. (FM or AM (MW, LW))
2. Tune in to a station.
∗
If “ MANU ” is lit in the display press and hold
the [ BAND ] button for 1 second or longer.
“ MANU ” in the display goes off and seek
tuning is now available.
∗
If “ TA ” is lit in the display, TP stations are
automatically sought.
●
DX SEEK
Press the [
a
] or [
d
] button to automatically
seek a station.
When the [
d
] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
a
] button is pressed, the station is sought
in the direction of lower frequencies.
∗
When seek tuning starts, “ DX SEEK ” appears
in the display.
●
LOCAL SEEK
If you press and hold the [
a
] or [
d
] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception
sensitivity are selected.
∗
When local seeking starts, “ LO SEEK ”
appears in the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
Radio Operations