Clarion VRX743R, Owner'S Manual

Page: 25 / 72

VRX848RVD/VRX743R
29
English
Owner
’s manual
Basic Operations
2-ZONE: 2 (rear monitor lock)
1. Press the [ ADJ ] button to display the
ADJUST MODE menu.
2. Touch the [ MONITOR ] key.
3. Touch the [ REAR MONI LOCK ] key and the
[ ON ] key.
4. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
5. To cancel the monitor lock, press [ ADJ ]
button, touch the [ REAR MONI LOCK ] key
and the [ OFF ] key.
6. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
The monitor lock is now canceled.
Adjusting the GENERAL
1. Press the [ ADJ ] button, then touch the
[ GENERAL ] key to display the GENERAL
setting menu.
2. Touch the item you wish to set.
∗
To switch to the next menu, touch the [
z
]
key.
∗
When settings are completed, touch the [ RTN ]
key, [ ESC ] key, or press the [ ADJ ] button.
●
Setting the BEEP
∗
The sound heard when you make operations is
called “
beep ”. The unit can be set up so that it
does not produce this beep sound.
∗
The factory default setting is “ BEEP ON ”.
2-1. Touch the [ BEEP ] key to select “ ON ” and
“ OFF ”.
●
Setting the button illumination
∗
The factory default setting is “ RED ” (red).
2-1. Touch the [ KEY ILLUMI ] key to select
“ RED ” (red) or “ GREEN ” (green).
●
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Touch the [ BLINK LED ] key to select “ ON ”
and “ OFF ”.
●
Setting the Auto Panel
When you remove or attach the DCP, you can
set the liquid crystal panel automatically housing
or opening.
∗
The factory default setting is “ OFF ”.
2-1. Touch the [ AUTO PANEL ] key to set “ ON ”,
“ OFF ” or “ CLOSE ”.
ON : The liquid crystal panel houses
automatically after removing the
DCP.
And the liquid crystal panel open
automatically after attaching the
DCP.
OFF : Normal operation.
CLOSE : The liquid crystal panel houses
automatically after removing the
DCP.
●
Switching CONNECT (connect)
Make the following settings when an external
device is connected to the Visual terminal.
NAX DV: when a Clarion navigation system
(NAX943DV) is connected
OTHR NVG:
when a Clarion navigation system
(NAX9500E) is connected
COMPO: when a navigation system is
connected
∗
When a navigation system is
connected, use the monitor lock
function. Locking the monitor locks
the screen size in F.WIDE mode (full
wide) and the VTR system to NTSC.
OTHERS: for external devices other than a
navigation system; when connecting
a CCD camera
NONE: when no external devices are
connected
∗
The factory default setting is “ NONE ”.
2-1. Touch the [ CONNECT ] key to select “ NAX
DV ”, “ OTHR NVG ”, “ COMPO ”, “ OTHERS ”
or “ NONE ”.
●
Time setting in air conditioner operation
mode
This setting can be used to adjust the time the
panel stays in the horizontal position when in
the air conditioner operation mode.
∗
The factory default setting is “ 10s ”.
2-1. Touch the [ HVAC MODE ] key to set to “ 5s, ”
“ 10s, ” or “ 30s. ”