28
VRX848RVD/VRX743R
English
Owner
’s manual
Basic Operations
●
Warning display when CCD camera is
installed
When a TV tuner (sold separately) is installed
together with optional CCD camera, the
following warning message is displayed during
use of the CCD camera: “
Make sure of safety
around your vehicle
”
∗
The factory default setting is “
ON”
2-1. Touch the [
CAMERA WARNING
] key to
switch between “
ON
” and “
OFF
”.
∗
When a CCD camera is connected to the
MINI DIN 8P connector, go to ADJUST
MODE and set “
CONNECT
” to “
OTHERS
”.
●
Switching the VTR system between NTSC
and PAL
∗
This function is enabled only when the panel is
open.
∗
The factory default setting is “
PAL
”.
Switch to the VISUAL/VTR in TV mode you use.
2-1. Touch the [
NTSC/PAL
] key to select
“
NTSC
” or “
PAL
”.
Switching the front and rear
monitor lock
The front monitor lock and rear monitor lock
allows you to enjoy 2-ZONE.
2-ZONE:
Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image
from a separately sold rear monitor) to switch
the speaker sound to a sound mode that differs
from the sound accompanying the image.
Notes:
• The front (rear) monitor lock displays the image of
an external device (VTR, TV game console, etc.)
connected to the Visual terminal.
• When 2-ZONE is used, the sound from an
external device (VTR, TV game console, etc.) can
only be heard from headphones connected to the
external device.
• A rear monitor is a separately sold accessory.
2-ZONE: 1 (front monitor lock)
1. Press and hold the [
ADJ
] button for 1 second
or longer.
2. Press the [
FUNC
] button to select the
desired mode.
3. To cancel the monitor lock, press the [
ADJ
]
button.
The screen shows the image of the selected
mode.
●
Lock system monitor image and sound
Front image
(receiver
screen)
Rear monitor
image
(separately
sold)
Vehicle speaker
sound
Image of device
connected to the
Visual terminal
(
∗
3)
Image of device
connected to the
Visual terminal
Displays image of mode selected
using the [
FUNC
] button
Image of device connected to the
Visual terminal
Displays image of mode selected
using the [
FUNC
] button (
∗
2)
Plays sound of mode selected using the [
FUNC
] button
Front monitor lock
Rear monitor lock
Visual connection
“OTHERS”
Visual connection
“COMPO”
Visual connection
“OTHERS”
Visual connection
“COMPO”
(
∗
1)
∗
1 A device connected to the Visual terminal
should be set up as described in the section
“
Switching CONNECT
.”
∗
2 No image is displayed on the rear monitor
when a non-image mode such as radio,
DAB, CD, etc. is engaged.
∗
3 For safety reasons, this image is not
displayed when the vehicle is moving. The
picture can be watched only when the
vehicle is standing still and the parking brake
is engaged.
