42
NZ502E
English
English
Owner’
s Manual
English
Owner’
s Manual
AF (Alternative Frequency) function
The AF function switches to a different frequency
on the same network in order to maintain optimum
reception.
Switching ON/OFF the AF function
1. Touch the
[
]
key.
2. Touch the
[
]
or
[
]
key of the AF item to
turn the function on or off.
• When the AF function is ON, “AF” will be displayed
at the top of the screen.
• If the reception of the current broadcast station
deteriorates durably, “AF” indication will blink, and
this unit searches for the same program on another
frequency.
REG (Regional Program) function
When the REG function is ON, the optimum regional
station can be received. When this function is OFF, if
the regional station area is switched as you drive, a
regional station for that region is received.
Note:
• This function is disabled when a national station such
as BBC R2 is being received.
• The REG function ON/OFF setting is enabled only when
the AF function is ON.
Switching ON/OFF the REG function
1. Touch the
[
]
key.
2. Touch the
[
]
or
[
]
key of the REG item to
turn the function on or off.
TA (Traffic Announcement) function
When a traffic announcement broadcast starts during
the TA standby mode, the traffic announcement
broadcast is received as top priority regardless of
the function mode, so you can listen to it. The Traffic
Program (TP) automatic tuning is also available.
Setting TA standby mode
1. Touch the
[
]
key.
2. Touch the
[
]
key of the TA item to set the TA
standby mode.
“TA”
will be displayed at the top of
the screen, and the system will automatically search
for a TP station (TP SEEK). When an RDS broadcast
station with traffic announcement program is
received,
“TP”
will be displayed at the top of the
screen.
Note:
• If no TP station is received, this system continues the
search operation. Performing the above procedure
again makes the “TA” go off, and stops TP station
searching.
Canceling a Traffic Announcement broadcast
Touch the
[Cancel]
key while a Traffic Announcement
broadcast is being received. The Traffic Announcement
broadcast reception is canceled, and the system goes
into the TA standby mode.
Canceling TA standby mode
1. When
“TA”
is displayed on the screen, touch the
[
]
key.
2. Touch the
[
]
key of the TA item.
“TA”
on the screen goes off, and the TA standby mode
is canceled.
PTY (Program Type) function
This function enables you to listen to a broadcast of
the specified program type when the broadcast starts,
even if the system operates in a mode other than the
Tuner mode.
• Some countries do not yet have PTY broadcast.
• In the TA standby mode, a Traffic Announcement
broadcast station has priority over a PTY broadcast
station.
Selecting PTY
1. Touch the
[
]
key.
2. Touch the
[
]
key of the PTY item to enter the
PTY standby mode.
3. Touch the
[
]
key (program type display) to
display the PTY Select screen.
4. Touch your desired PTY Preset key to select the
program type.
5. Touch the
[
]
key to return to the previous
screen.
Canceling PTY standby mode
1. Touch the
[
]
key.
2. Touch the
[
]
key of the PTY item.
“PTY”
goes off, and the PTY standby mode is
canceled.
PTY seek
1. Touch the
[
]
key.
2. Touch the
[
]
key (program type display) to
display the PTY Select screen.
3. Touch your desired PTY Preset key to select the
program type.
4. Touch a Seek key, the system seeks a PTY
broadcast moving up the frequencies.
• The 29 types of PTY listed below can be selected.
Summary of Contents for NZ502E
Page 65: ...NZ502E NP402E ...
