Clack Water Specialist CI WS1, Installation, Operation, Maintenance Manual

Page: 7 / 22

7
CI Valve connections.
Connect NHWB here marked Drive if
used.
Connect power here marked 12V DC
When all connections have been made
the power can be turned on and
programming can take place.
TC Valve connection.
Connect power here marked 12V DC
4202035013
SNo 08090137
Mis
0919-255-760
CI connection
TC connection
When all the connections have been made the power can be turned on and site programming
can take place.
2.7 Identifying your system.
Your Filter will have an identification label fixed to the control valve; this will look similar to the
picture shown here.
The information listed can be read as follows:
Stock Number: Manufacturers part number.
Serial No: Serial No.
Id Code: System type identification code.
Configuration: Vessel size, Valve type & Controller type.
Identify the settings from the charts in the programming section by looking at the vessel size
and controller type.