Page 30
WS2H Control Valve Manual
V3051 WS2 DLFC ASY NPT and V3051BSPT WS2 DLFC ASY BSPT
Drawing No.
Order No.
Description
Quantity
1
V3052
WS2 DLFC Retainer ASY
1
2
V3245
WS2 DLFC FLANGE INLET NPT
1
V3245BSPT
WS2 DLFC FLANGE INLET BSPT
3
V3246
WS2 DLFC FLANGE OUTLET NPT
1
V3246BSPT
WS2 DLFC FLANGE OUTLET BSPT
4
V3273
BOLT HEX HD S/S HCS 3/8-16X3/4
4
5
V3278
O-ring 338
1
Not Shown
V3162-007
WS1 DLFC 0.7 gpm for 3/4
Install One or
More DLFC’s.
Up to 5 of
the V3162-
XXX may be
installed in the
small holes.
Up to 4 of
the V3190-
XXX may be
installed in the
large holes.
V3162-010
WS1 DLFC 1.0 gpm for 3/4
V3162-013
WS1 DLFC 1.3 gpm for 3/4
V3162-017
WS1 DLFC 1.7 gpm for 3/4
V3162-022
WS1 DLFC 2.2 gpm for 3/4
V3162-027
WS1 DLFC 2.7 gpm for ¾
V3162-032
WS1 DLFC 3.2 f gpm or 3/4
V3162-042
WS1 DLFC 4.2 gpm for 3/4
V3162-053
WS1 DLFC 5.3 gpm for 3/4
V3162-065
WS1 DLFC 6.5 gpm for 3/4
V3162-075
WS1 DLFC 7.5 gpm for 3/4
V3162-090
WS1 DLFC 9.0 gpm for 3/4
V3162-100
WS1 DLFC 10.0 gpm for 3/4
V3190-090
WS1 DLFC 9.0 gpm for 1
V3190-100
WS1 DLFC 10.0 gpm for 1
V3190-110
WS1 DLFC 11.0 gpm for 1
V3190-130
WS1 DLFC 13.0 gpm for 1
V3190-150
WS1 DLFC 15.0 gpm for 1
V3190-170
WS1 DLFC 17.0 gpm for 1
V3190-200
WS1 DLFC 20.0 gpm for 1
V3190-250
WS1 DLFC 25.0 gpm for 1
Assemblies are shipped without drain line fl ow control (DLFC). Assembly instructions:
1.
Determine the desired fl owrate. Select a combination of V3162-XXX’s and V3190-XXX’s to arrive at the desired fl ow rate. Up to fi ve of the
smaller V3162-XXX’s may be used. Up to four of the larger V3190-XXX’s may be used.
2.
Using a drill or punch remove the desired knockout(s) in V3052.
3. Smooth
hole(s).
4.
Install appropriate size(s) of drain line fl ow control washers. Pay close attention to proper DLFC orientation.
5.
Assemble. Properly orientate the V3052 in the direction of fl ow.
6.
Inlet and outlet threads are 2” NPT. Couplings for iron pipe may also be used.
Washer
Radius
Direction
Of Flow
B indictates BSPT
N indicates NPT
Direction
Of Flow
et
1
w
4
1
2
1
5
3
4
