WS2H Control Valve Manual
Page 27
Drive Cap Assembly, Downfl ow Piston, Regenerant Piston, Spacer Stack Assembly, Drive Back Plate,
Main Body and Meter
Drawing No.
Order No.
Description
Quantity
1
V3274
WS2 SCREW BTNSKT HD SS3/8-16X2
4
2
V3291
WS2 WASHER SS 3/8
4
3
V3225
WS2 BACK PLATE
1
4
V3066
WS2 DRIVE ASY
1
5
V3289
O-RING 344
1
6
V3204-01
WS2 PISTON
1
7
V3238-01
WS2 BRINE PISTON
1
8
V3065
WS2 STACK ASY
1
Not Shown
V3468
WS2 PLUG 1/4 HEX NPT (included when ordering V3201-03)
2
V3465
WS2 PLUG 1/4 HEX BSPT (included when ordering V3201BSPT-03)
9
V3201-03
WS2 BODY W/V3468 PLUG
1
V3201BSPT-03
WS2 BSPT BODY W/V3465 PLUG
10
V3223
WS15/WS2 METER CLIP
1
11
V3003-02
WS1.5/2H METER COMMERCIAL ASY
1
12
V3118-03
WS1.5/2 TURBINE ASY
1
13
V3105
O-RING 215
1
14
V3501
WS1.5/2 TURBINE CLIP
1
15
V3279
O-RING 346
1
16
V3280
O-RING 332 FOR VALVE BODIES WITH NPT THREADS
1
V3452
O-RING 230 FOR VALVE BODIES WITH BSPT THREADS
17
V3054**
WS2 4 IN BASE CLAMP ASY
1
18
V3276
WS2 BOLT HEX SS 5/16-18X1-3/4
1
19
V3269
WS2 NUT 5/16-18 SS HEX
1
Not Shown
D1300-01
TOP BAFFLE DFSR CLACK 2/63MM
1
**V3054 WS2 4 IN BASE CLAMP ASY includes a V3276 WS2 BOLT HEX SS 5/16-18X1-3/4 and V3269 WS2 NUT 5/16-18 SS HEX.
1
2
3
4
5
6
7
8
10
9
15
16
18
19
17
11
12
13
B or indent
indicates BSPT
N or no mark
indicates NPT
Install D1300-01 upper diffuser (not shown) when using the 4” Quick Dissconnect (V3064)
In 2007, a u-shaped retaining clip (V3501) was added to commercial meter assemblies to hold the turbine assembly in place. If V3501 is present, service or replace
the turbine by:
1. Removing bend from the two exposed tips of the retaining clip and remove clip.
2. Service or replace the V3118-03 WS1.5/2 Turbine Assembly and place back on the turbine shaft.
3. Insert the V3501 WS1.5/2 Turbine Clip and rebend the exposed tips.
The V3118-03 has a groove to line up with the V3501 WS1.5/2 Turbine Clip. If the meter assembly does not have two holes in the bottom to insert the clip, use a
V3118-01 Turbine Assembly or replace the entire meter.
14
