Claas TUCANO 500, Information And Basic Field Settings

Page: 44 / 48

“Threshing won’t engage and none
of the hydraulics are working.”
Check that the road travel switch
is not engaged.
“Threshing has engaged but the engine
will not go to full rpm when the engine
speed dial is turned.”
Check that the combine is not in
3rd gear.
“Getting a poor sample after many
adjustments.” Check that the preparation floor
are clean.
“The machine will not change gear.” Make sure that the multifunction
lever is in its neutral position and
both the footbrake pedals are applied,
then briefly press the gear rocker
switch once to select a gear.
“The machine goes off course
when AUTOPILOT is engaged.”
Make sure that the LASER PILOT is set
up correctly and check CEBIS settings.
“The machine is lacking performance.”
What are the settings in CEBIS?
what are the crop and field conditions?
Make sure that threshing segment
is removed from the main concave
and that the crop is not being over
threshed. When chopping check that
the fine chop step is not engaged and
the stationary knives are backed off.
Frequently Asked Questions
44