Claas TUCANO 500, Information And Basic Field Settings

Page: 41 / 48

41
EASY
Losses
Settings
Cab Contr
ols
EASY: Steering
Service Maintenance
Tips:
To activate LASER PILOT,
make sure it is turned on in CEBIS [1]
and that LASER PILOT is selected [2].
To set up the LASER PILOT,
make sure the combine has a straight
edge and is lined up with the crop.
With the engine running and the
threshing engaged, the LEDs on the
back of the LASER PILOT should all
be in the middle.
If the LEDs are:
1- it is too high,
2- it is too low,
3- it is too far right,
4- it is too far left.
To adjust the LASER PILOT,
you only need the panel spanner.
If the LASER PILOT is not steering straight ahead,
check the adjustments in the HOTKEY first.
Check the back of the LASER PILOT.
5 - adjust up or down and left or right or clean glass.
6 - no crop edge, adjust left or right.
Turn on CEBIS
Select LASER PILOT
Line up with the crop edge before
pressing the AUTOPILOT button
on the joystick.
1
2