33
EASY
Losses
Settings
Cab Contr
ols
Service Maintenance
Settings: Threshing
To obtain initial settings, it is recommended that the ‘CLAAS settings’ are loaded
through CEBIS and these are to only be used as a starting point, then adjustments
should be made from there.
The prime objective here is to remove
the maximum amount of grain with
minimum damage to grain and straw.
Over-threshing can crack grains,
produce more chaff and use more
power.
It is imperative for the performance of
the machine that the concaves are kept
clean. Generally, wider concave gaps
are accepted when using a TUCANO.
Only make one adjustment at a time.
Only do just enough threshing, over threshing causes
overloading of the sieves and uses power unnecessarily.
It is recommended that the drum speed is adjusted by
100rpm at a time.
Tips:
Summary of Contents for TUCANO 500
