Claas TUCANO 500, Information And Basic Field Settings

Page: 31 / 48

31
EASY
Losses
Settings
Cab Contr
ols
Settings: Side Knife/Divider
Service Maintenance
Both the side knife and the divider use
the new fork locating and locking device.
For the side knife, simply slide into the lock
and turn the handle to lock in place. Make
sure the lever has locked into the locking
device.
Once the side knife is fitted and locked, all
that is required is for two hydraulic pipes
to be connected to the quick release
couplings on the side of the cutterbar.
There is no need for a link pipe to be
connected when the side knife is removed.
When fitting the side knife, make sure that
the cradle is tight to the underside of the
tube.
Make sure the cutterbar VARIO table is
pushed out to the side knife mark on the
side of the cutterbar before fitting the
knife.
When placing the cutterbar on the trolley, put the cutterbar
in ‘park position’. With the engine running and threshing
disengaged, press and hold the AUTOCONTOUR button,
the cutterbar will then go into park and there will be a beep
from CEBIS when it is complete. Tip: