45
EASY:
CRUISE PILOT
To engage CRUISE PILOT press the AUTOPILOT button on the joystick.
The symbols in the HOTKEY direct menu will have the colours inverted on
activation.
To de-activate the CRUISE PILOT either move the control lever with a jerk or
give a short firm press on both foot brake pedals.
TIP.
If just using CRUISE
CONTROL (fixed ground speed)
drive the combine into the crop
at your desired speed then press
and hold the AUTOPILOT button
for 3 seconds, there will be a
beep from the CEBIS screen. This
speed is now saved.
TIP.
If using Performance mode,
(constant throughput) set the
target throughput to the middle
then increase until you reach your
desired speed.
TIP.
If using the Throughput mode
make sure that the monitors are
showing what you need them to
show.
Check your losses!
To adjust and monitor CRUISE PILOT once in work, turn the HOTKEY to the
CRUISE PILOT symbol.
TIP.
Make sure that the combine has crop going through it before pressing
the AUTOPILOT button on the joystick.
Summary of Contents for LEXION 740
Page 1: ...Information and Basic Field Settings for LEXION 780 740...
Page 2: ......
Page 15: ...15 Notes...
Page 43: ...43 Notes...
