Settings:
Threshing
To obtain initial settings it is recommended that the ‘CLAAS settings’ are loaded
through CEBIS, these are to only be used as a starting point, then adjustments
should be made from there.
TIP.
Only make one adjustment at a time.
TIP.
Only do just enough threshing, over threshing causes overloading of the
sieves and uses power unnecessarily.
TIP.
It is recommended that the drum speed is adjusted by 100rpm at a time.
The prime objective here is to remove the maximum amount of seed with the
minimum of damage to seed and straw. Over-threshing cracks grains, produces
more chaff and uses more power.
It is imperative for the performance of the machine that the concaves are kept
clean. Generally wider concave gaps are accepted when using your LEXION.
33
Summary of Contents for LEXION 740
Page 1: ...Information and Basic Field Settings for LEXION 780 740...
Page 2: ......
Page 15: ...15 Notes...
Page 43: ...43 Notes...
