Cla-Val Product
Identification
Proper Identification
For ordering repair kits, replacement parts, or for
inquiries concerning valve operation it is important to
properly identify Cla-Val products already in service.
Include all nameplate data with your inquiry. Pertinent
product data includes valve function, size, material,
pressure rating, end details, type of pilot controls
used and control adjustment ranges.
Identification Plates
For product identification, cast in body markings are
supplemented by identification plates as illustrated on
this page. The plates, depending on type and size of
product, are mounted in the most practical position.
It
is extremely important that these identification
plates are not painted over, removed, or in any
other way rendered illegible.
C
®
™
C
®
™
This brass plate appears on valves sized 2
1
/
2
" and larger
and is located on the top of the inlet flange.
These two brass plates appear on
3
/
8
",
1
/
2
", and
3
/
4
" size
valves and are located on the valve cover.
These two brass plates appear on 1" through 3" size
screwed valves or 1" through 2" flanged valves . It is
located on only one side of the valve body.
This brass plate appears on altitude valves only and is
found on top of the outlet flange.
This brass plate is used to identify pilot control valves.
The adjustment range is stamped into the plate.
This tag is affixed to the cover of the pilot control valve.
The adjustment range appears in the spring range
section.
This aluminum plate is included in pilot system
modification kits and is to be wired to the new pilot
control system after installation.
This brass plate is on our backflow prevention
assemblies. It is located on the side of the number two
check (2" through 10"). The serial number of the
assembly is also stamped on the top of the inlet flange of
the number one check.
How to Order
Distributed By: M&M Control Service, Inc.
http://www.mmcontrol.com/claval-index.php
800-876-0036 847-356-0566
