[SM-200164-A/4]
−
18
−
INSTALLATION
４
4.4 Wiring
Before wiring, read the instruction manual carefully and
understand the instructions.
A person who wires needs to have knowledge for safely
performing such operation based on the understanding
about the mechanisms and operating principles of sole-
noid valves.
Before supplying the power, check the power supply
voltage and the current type (AC or DC).
1)
Caution for wiring
(1) When using the small terminal box and water-proof is required, use cab-tire
cords
φ
4 to
φ
6.5 in outer diameter (water-resistance is improved, but not
for outdoor use).
(2) The connector type (C, C1, C2, C3, D, D1, D2, D3) should be used in a place
with little dust and not directly exposed to water and oil.
(3) For the electrical circuit, use a switching circuit free of chattering.
(4) The electrical circuit should have fuses.
(5) Be sure that the operation voltage is within 10% of the rated voltage.
！
WARNING :
！
CAUTION :
