[SM-200164-A/4]
−
2
−
4. Do not handle, pipe, or remove devices before confirming safety.
①
Inspect and service the machine and devices after confirming safety of the entire
system related to this product.
②
Note that there may be hot or charged sections even after operation is stopped.
③
When inspecting or servicing the device, turn off the energy source (air supply or water
supply), and turn off power to the facility. Release any compressed air from the system,
and pay enough attention to possible water leakage and leakage of electricity.
④
When starting or restarting a machine or device that incorporates pneumatic
components, make sure that system safety, such as pop-out prevention measures, is
secured.
5. Observe warnings and cautions on the pages below to prevent
accidents.
The safety cautions are ranked as "DANGER", "WARNING" and
"CAUTION" in this section.
：
When a dangerous situation may occur if handling is mistaken
leading to fatal or serious injuries, or when there is a high
degree of emergency to a warning.
：
When a dangerous situation may occur if handling is mistaken
leading to fatal or serious injuries.
：
When a dangerous situation may occur if handling is mistak-
en leading to minor injuries or physical damage.
Note that some items described as "CAUTION" may lead to serious results depending
on the situation. In any case, important information that must be observed is explained.
DANGER
WARNING
CAUTION
