5
breaker will re-set.
Note: If internal circuit breaker trips, something is wrong. Correct
fault before using system!
6. Mini-Zapi™: Resets any connected Color Kinetics CB fixtures to
Light 001
(DMX 001,002 &
003), preparing them for easy use with the CB Mode setting
Figure 2, PDS-750-TR, Back Panel
Back Panel Features
7. IEC Power Inlet, Connect Mains Power Cord here.
8. DMX INPUT, 5P XLR Male Panel Mount connector, auto-terminated
9. DMX OUTPUT, 5P XLR Female Panel Mount connector, a re-generated, optically isolated
DMX output (the Unit switches to passive hard-wired pass-thru if power is lost)
10. Fixture Output # 1, 4P XLR Female, for connection of Color Kinetics fixtures
11. Fan, do not obstruct
12. Fuse (10A 3AG)
Mains Power Requirements
The PDS-750-TR is is compatible with 100-240 VAC, 50/60 Hz Mains Power. The unit is
provided with a panel mount IEC Input connector for use with standard 100V – 240V cord sets.
Connecting Color Kinetics fixtures to the PDS-750-TR
The PDS-750-TR is provided with Female 4 pin XLR connectors for output connection to the CK
fixtures. The connector pin out is as follows:
