Citizen PD 22 PD-22 PD-22, Command Reference Manual

Page: 91 / 100

91
Changing the bit image mode/ESC ?
[ASCII]
ESC ? c m
[Decimal] 27 63 c m
[Hexadecimal] 1B 3F c m
[Parameter]
c = “K”, “L”, “Y”, “Z” (4Bh, 4Ch, 59h, 5Ah)
m = 0, 1, 2, 3, 4, 6, 32, 33, 38, 39
[Description]
● Converts the bit image mode of ESC K, ESC L, ESC Y, and ESC Z into the mode of ESC *.
● Specifies the value of ‘m’ in the same manner as parameter ‘m’ to be specified in ESC * modes.
● ‘c’ indicates the type of bit image (ESC K, ESC L, ESC Y, ESC Z) to be converted.
● Specifies ‘c’ as follows.
ESC
K → ESC ? K m
ESC L → ESC ? L m
ESC Y → ESC ? Y m
ESC Z → ESC ? Z m
● The power-ON default setting of each code is as follows.
ESC
K → ESC * 0
ESC L → ESC * 1
ESC Y → ESC * 2
ESC Z → ESC * 3